How to fit your BikyBag

1. Hang the bags over the rack: the 13 cm (5.1″) bridge sits across the top.
2. Fasten the two buckle straps on top around the rack rail.
3. Close the two hook-and-loop straps at the bottom around the lower rail. No tools needed.

This bag fits racks 12–16 cm wide.

1. Hang the bag over the rack using the two buckle straps at the top — these clip over the top rail.
2. Secure the two hook-and-loop straps at the bottom around the lower rack leg to stop the bag swinging.
3. Check the bag isn't touching your spokes before riding — adjust the lower straps if needed.

This bag fits racks 12–16 cm wide.

1. Hold the bag next to your rack and press the black button on the hook to adjust horizontal position.
2. Clip the upper hooks over the rack's top rail — they lock automatically.
3. Rotate the lower catch to the most secure position (adjustable in 45° steps) to stop the bag swinging.
4. Give the bag a firm tug to confirm it's locked before riding.

Your rack's side tubes need to be between 8 mm and 16 mm (0.31″–0.63″) in diameter.

1. Hold the Shopper next to your rack.
2. Clip the two plastic hooks over the top rail of your rack.
3. Wrap the central velcro strap around the rail and fasten — this stops the bag swinging while you ride.
4. Check the bag isn't touching your spokes before riding.

The hooks fit rack tubes up to a maximum of 13 mm (0.51″) in diameter.

1. Hang the bags over the rack: the 10 cm (3.9″) bridge sits across the top.
2. Fasten the two buckle straps on top around the rack rail.
3. Close the two hook-and-loop straps at the bottom around the lower rail. No tools needed.