Will it fit?

Rack compatibility

It’s not about your bike. It’s about the fit.

BikyBag panniers strap onto almost any standard rear rack. Whether they fit comes down to a few simple measurements — not the make or model of your bike. Pick your bag below.

01The four measurements
Rear pannier rack with the four key measurements marked A, B, C and D
The four things that decide the fit
A
Gap between rails12–16 cmInner edge to inner edge
B
Drop below the rail34 cm minSo the 34 cm bag clears the hub
C
Rack length20 cm min · 34 cm idealUnder 34 cm and the bag overhangs
D
Side bars3 recommendedStops swing & spoke contact
02Check yours
Inner edge to inner edge of the side rails
From the top rail down towards the wheel hub
Front to back of the rack platform
Three is ideal — stops swing & spoke contact
03How it holds on
i

Strap over the rail

Two 16 cm top straps loop over the rack’s top rail. Fasten the metal buckle beneath the tube.

ii

Secure the base

The hook-and-loop strap wraps the lower strut, keeping the bag steady on rough ground.

iii

Tug and ride

A quick pull confirms it’s locked. On and off by hand in seconds — no tools needed.

04What works, what doesn’t

Fits

  • Standard rear racks with an exposed top rail
  • E-bikes with a bolt-on rear rack
  • City, trekking & touring bikes
  • Any rack measuring 12–16 cm across

Doesn’t fit

  • ×Bikes with no rear rack fitted
  • ×Enclosed racks with no exposed rail
  • ×Proprietary click-fit-only systems
  • ×Racks wider than 16 cm or under 12 cm
?

Measured and still unsure?

Tell us your measurements and we’ll confirm the fit before you order.

Get in touch