Twoje wybory dotyczące prywatności
Zgodnie z opisem w naszej Polityce prywatności zbieramy dane osobowe na podstawie Twoich interakcji z nami i naszą witryną, w tym za pomocą plików cookie i podobnych technologii. Możemy również udostępniać te dane osobowe stronom trzecim, w tym partnerom reklamowym. Robimy to, aby wyświetlać Ci na innych witrynach reklamy bardziej dopasowane do Twoich zainteresowań oraz z innych powodów opisanych w naszej polityce prywatności.
Udostępnianie danych osobowych na potrzeby reklamy ukierunkowanej w oparciu o Twoje interakcje na różnych witrynach może być uznawane za „sprzedaż”, „udostępnianie” lub „reklamę ukierunkowaną” w rozumieniu niektórych stanowych przepisów o ochronie prywatności w USA. W zależności od miejsca zamieszkania możesz mieć prawo do rezygnacji z tych działań. Jeśli chcesz skorzystać z tego prawa do rezygnacji, postępuj zgodnie z poniższymi instrukcjami.
Jeśli odwiedzasz naszą witrynę z włączonym sygnałem preferencji rezygnacji Global Privacy Control, w zależności od Twojej lokalizacji potraktujemy to jako żądanie rezygnacji z działań, które mogą być uznane za „sprzedaż” lub „udostępnianie” danych osobowych, bądź inne wykorzystanie, które może być uznane za reklamę ukierunkowaną, dla urządzenia i przeglądarki użytych do odwiedzenia naszej witryny.
Nie chodzi o Twój rower. Chodzi o dopasowanie.
Sakwy BikyBag mocują się do niemal każdego standardowego tylnego bagażnika. To, czy będą pasować, sprowadza się do kilku prostych pomiarów — a nie marki czy modelu roweru. Wybierz swoją torbę poniżej.
Strap over the rail
Two 16 cm top straps loop over the rack’s top rail. Fasten the metal buckle beneath the tube.
Secure the base
The hook-and-loop strap wraps the lower strut, keeping the bag steady on rough ground.
Tug and ride
A quick pull confirms it’s locked. On and off by hand in seconds — no tools needed.
Fits
- ✓Standard rear racks with an exposed top rail
- ✓E-bikes with a bolt-on rear rack
- ✓City, trekking & touring bikes
- ✓Any rack measuring 12–16 cm across
Doesn’t fit
- ×Bikes with no rear rack fitted
- ×Enclosed racks with no exposed rail
- ×Proprietary click-fit-only systems
- ×Racks wider than 16 cm or under 12 cm
The Classic One is a single pannier with an adjustable hook mount — no straps. The hooks clamp straight onto your rack’s top rail, so it fits almost any rack, including e-bikes with integrated batteries or spring clamps.
Set the hook spacing
Press the button and slide the two hooks along the rail to match your rack — anywhere from 94 to 166 mm apart.
Hook it on
Lower the bag so both hooks drop over the top rail. They auto-lock onto tubes 8–16 mm thick.
Set the lower catch
Turn the lower catch to brace against the rack so the bag can’t swing. Lift the red lever to release and lift off.
Fits
- ✓Rack top tubes 8–16 mm thick
- ✓E-bikes with integrated batteries or spring clamps
- ✓Racks with at least 94 mm of straight top rail
- ✓Loads up to 5 kg per bag (recommended)
Doesn’t fit
- ×Tubes thinner than 8 mm or thicker than 16 mm
- ×Racks with no straight rail run of 94 mm
- ×Racks with no lower bar for the anti-swing catch
- ×Loads over 10 kg — beyond the mount’s rating
The Shopper hooks onto your rack’s top rail with two fixed hooks set 20 cm apart. There’s no lower catch, so it lifts on and off in one move — quick for shopping trips.
Line it up
Position the bag so both hooks — a fixed 20 cm apart — sit over the top rail.
Hook it on
Drop the hooks over the rail. They grip tubes up to 13 mm thick.
Off in one move
With no lower catch, the Shopper lifts straight off the rail when you arrive.
Fits
- ✓Rack top tubes up to 13 mm thick
- ✓Racks with at least 20 cm of straight top rail
- ✓Standard rear racks
Doesn’t fit
- ×Tubes thicker than 13 mm
- ×Less than 20 cm of straight rail for the hooks
Measured and still unsure?
Tell us your measurements and we’ll confirm the fit before you order.
Get in touch